Adaptive Calibration is a new technology for
the chronograph product and we are
the pioneers/inventors.

This feature is not found in any chronograph other then ours. Its basic purpose is to scan your environment for any of the following interferences that may affect velocity measurements and then adapt to this environment if possible:

• Fluorescent lights.

• Electromagnetic Interference.

• Power lines nearby.

• Sand dust or snow drifts.

• Flapping tree branches.

• Flocks of birds or swarm of bees.

• Unit not standing still.

• Direct sun light facing sensor slots.

• Continuous muzzle blast noise.

• Very strong incandescent lights.

When any of the above interferences is found,  the computer zeroes in on it. An attempt is made to determine if it will interfere with the velocity measurements. This process is rather complex and time consuming, it may take over 60 seconds when the interference is complex or as little as 5 seconds for a quiet environment.

When Adaptive Calibration is finished you get a report in the form of a number representing the quality of your environment. If the environment is unsuitable then you get an error indicating that the unit will not work unless you fix the problem.

With Adaptive Calibration the unit always tests itself before you start shooting.  There are two tests: a long test that is performed only when the unit is first setup, and a short test that is performed after each shot.

With our innovative Adaptive Calibration you get a continuous environment monitoring for the best reliability. There is no product like it on the market.